Anti-wear beam effects on gas–solid hydrodynamics in a circulating fluidized bed

Anti-wear beams installed on water walls of circulating fluidized bed (CFB) boilers are one of the most effective ways to protect against water-wall erosion. Beam effects from, for example, beam size and superficial gas velocity were investigated on gas–solid hydrodynamics in a CFB test rig using CFD simulations and experimental methods. The downward flow of the wall layer solids is observed to be disrupted by the beam but is then restored some distance further downstream. When falling solids from the wall layer hit the anti-wear beam, the velocity of the falling solids decreases rapidly. A fraction of the solids accumulates on the beam. Below the beams, the falling solids have reduced velocities but upward-moving solids were observed on the wall. The effect of the beam increases with width and superficial gas velocity. Wear occurs mainly above the beam and its variation with width is different above to below the beam. There is an optimum width that, when combined with beam height, results in less erosion.     

80.5 MeV/u碳离子诱发铜靶的放射性剩余产物测量

高能重带电粒子能直接穿透靶原子核外电子层,与原子核发生直接碰撞,发生散裂反应,产生一系列具有放射性的剩余产物核.重带电粒子诱发靶材放射性剩余核与辐射防护和人员安全有着密切联系,当前,大部分剩余核产额主要依靠蒙特卡罗粒子输运程序进行模拟计算,其准确程度亟需通过实验测量进行准确评估.本文利用能量为80.5 MeV/u的(12)^C⁶⁺粒子对薄铜靶开展了辐照实验与伽玛射线测量,结合伽玛谱学分析方法,得出了辐照产生的18种放射性剩余产物的初始活度和产生截面值,并与PHITS模拟结果进行对比.结果表明,PHITS模拟程序对放射性剩余核种类的估计具有较高可靠性,在其绝对产额方面,与实验测量仍具有较大偏差.     

2021 Emerging Investigator Issue of Science China Chemistry

Science China Chemistry -     

CO2-fixation into carbonate anions for the construction of 3d-4f cluster complexes with salen-type Schiff base ligands: from molecular magnetic refrigerants to luminescent single-molecule magnets

Six new carbonate-bridged Zn₂Ln₂ cluster complexes derived from salen-type Schiff base ligands [H₂L^a = N, N′-bis(3-methoxysalicylidene)-1,3-diaminopropane and H₂L^b = N, N′-bis(3-methoxysalicylidene)- 1,2-diaminoethane] have been synthesized. The bis-imine chain in Schiff base ligands have an obvious influence on the cluster complexes' structures, magnetic and luminescence properties. The carbonate bridging ligand exactly comes from autoimmobilization of carbon dioxide, which may mediate ferromagnetic coupling between Ln³⁺ ions, favoring magnetocaloric effects and single molecule magnet (SMM) properties. Complexes Zn₂Dy₂(μ³-CO₃)₂(L^a)₂(NO₃)₂(MeOH)₂ ( 1 ) and [Zn₂Dy₂(μ³-CO₃)₂(L^b)₂(NO₃)₂]·2MeOH ( 2) show field-induced SMM properties; complexes Zn₂Tb₂(μ³-CO₃)₂(L^a)₂(NO₃)₂(MeOH)₂ ( 3 ) and [Zn₂Tb₂(μ³-CO₃)₂(L^b)₂(NO₃)₂]·2MeOH ( 4 ) display both luminescence and field-induced SMM behaviors; while complexes [Zn₂Gd₂(μ³-CO₃)₂(L^a)₂(NO₃)₂]·2MeOH ( 5 ) and [Zn₂Gd₂(μ³-CO₃)₂(L^b)₂(NO₃)₂]·2MeOH ( 6 ) exhibit medium magnetic entropy changes, which are candidates for cryogenic molecular magnetic refrigerants.     

Insights into the Control of Optoelectronic Properties in Mixed-Stacking Charge-Transfer Complexes

Although cocrystallization has provided a promising platform to develop new organic optoelectronic materials, it is still a big challenge to purposely design and achieve specific optoelectronic properties. Herein, a series of mixed-stacking cocrystals (TMFA, TMCA, and TMTQ) were designed and synthesized, and the regulatory effects of the acceptors on the co-assembly behavior, charge-transfer nature, energy-level structures, and optoelectronic characteristics were systematically investigated. The results demonstrate that it is feasible to achieve effective charge-transport tuning and photoresponse switching by carefully regulating the intermolecular charge transfer and energy orbitals. The inherent mechanisms underlying the change in these optoelectronic behaviors were analyzed in depth and elucidated to provide clear guidelines for future development of new optoelectronic materials. In addition, due to the excellent photoresponsive characteristics of TMCA, TMCA-based phototransistors were investigated with varying light wavelength and optical power, and TMCA shows the best performance among all reported cocrystals under UV illumination.     

N-Doped Graphdiyne Coating for Dendrite-Free Lithium Metal Batteries

Nonuniform nucleation is one of the major reasons for the dendric growth of metallic lithium, which leads to intractable problems in the efficiency, reversibility, and safety in Li-based batteries. To improve the deposition of metallic Li on Cu substrates, herein, a freestanding current collector (NGDY@CuNW) is formed by coating pyridinic nitrogen-doped graphdiyne (NGDY) nanofilms on 3D Cu nanowires (CuNWs). Theoretical predictions reveal that the introduction of nitrogen atoms in the 2D GDY can enhance the binding energy between the Li atom and GDY, therefore improving the lithiophilicity on the surface for uniform lithium nucleation and deposition. Accordingly, the deposited metallic Li on the NGDY@CuNW electrode exhibits a dendrite-free morphology, resulting in significant improvements in terms of the reversibility with a high coulombic efficiency (CE) and a long lifespan at high current density. Our research provides an efficient method to control the surface property of Cu, which also will be instructive for other metal batteries.